submitted: Oct 26th 2008 | by: teahupoo | Total views: 11 | Word Count: 505 | |

In this article we will examine some of the most popular types of gas saving devices that are available in the market. There are number of additives that can be added to the gas tank or to the engine oil that may enhance fuel economy. Such additives are called gas and oil additives. How do these work? Let's look how and where to add these additives in your vehicle.

Add gas additives to the tank.

Then fill up the tank as per your requirement.

Remember since the gas additive takes up some part of the tank, it will reduce the volume of gas that you eventually have.

These additives could be platinum, magnesium and tin. Such additives are supposed to be removing material that settles down in the bottom of the tank over time.

The additives for oil are generally already mixed with oil.

The oil additives increase the velocity of oil and reduce the friction thereby improving the performance of the engine.

These are not very expensive and are available in most stores.

There are certain precautions that you must take while using such additives. These are as follows:

Never use acetone as it will corrode the plastic parts in your engine.

Most additives are such that they are not designed to do much. The mileage that you get without additives in a well-maintained vehicle is more or less the same after adding additives. So do not add something hoping that it would improve the fuel economy but instead you end up paying to fix your engine.

Always use the grade of oil with or without additives that is specific for your engine.

One more gas saving device is a magnetic device. The ability of the magnets to attract and rebel things are used effectively to create devices that can save gas. Let's again note some important points regarding magnetic gas saving devices:

When you are using magnetic devices, you have the freedom to add or remove it at any time.

You are not actually adding anything to the gas or the oil which gives consumers a peace of mind.

Once you put on a magnetic device you are good for life. You do not need to refill it and buy it again and again.

Magnets that promise reducing the gas consumption of your vehicle generally cost between $15 and $40.

Generally magnetic devices save gas in terms of 1/10th of a gallon.

Attached to the fuel line of the vehicle these devices are meant to alter the molecular structure of the fuel.

It is easy to put on the vehicle and remove it.

Although there are plenty of different devices claiming 10%-20% gas savings, but almost all gas saving devices that use magnetic properties yield the same result. Even after testing these devices keeping the variables like temperature, engine conditions, etc. constant the result has always been more or less the same.

About the Author

Gregg Hall is an author living on the Emerald Coast of Florida. Now that you know a little more about gas saving products be sure that you get gas saving devices by going to http://www.nsearch.com

Comments

No comments posted.

You do not have permission to comment. If you log in, you may be able to comment.